This is a complete remote car key for Suzuki. A great replacement for your old, worn-out or lost car key can also be a spare key. This TS004 replacement key is assembled and ready for programming. It includes a 2-button key shell case, HU87 uncut key blade, ID46 transponder chip, 433MHz remote control and battery. 

• Compatibility for: Suzuki Alto 2007 - 2009

Features:

• COMPLETE & READY FOR PROGRAMMING: Remote and ID46 transponder chip included, ready after proper setup
• HIGH-QUALITY REPLACEMENT: Complete Remote Car Key replacement for a key with broken buttons, worn or lost key case
• DURABLE KEY SHELL: Made from high-quality materials for long-lasting use
• UNCUT KEY BLADE: Supplied uncut, can be cut to fit your car
• TRANSPONDER CHIP (ENGINE START): ID46 can be programmed only in a Locksmith
• REMOTE CONTROL (LOCK / UNLOCK DOORS): Can be self-programmed only if you have at least one working remote key

IMPORTANT NOTES BEFORE PURCHASE:

Car Key Specification:

• Key Type: Complete Car Key
• FCC ID: KBRTS004
• Remote Frequency: 433 MHz
• Chip: ID46 Transponder 
• Material: Plastic + Metal
• Colour: Black
• Buttons: 2 
• Blade: HU87 Uncut (must be cut by a locksmith)
• Transponder Chip (Engine Start): Can be programmed only in a Locksmith
• Remote Control (Lock / Unlock Doors): Can be self-programmed if you already have at least one working remote key
• Package Content: Complete Remote Car Key with Battery 

1) You must check your key to ensure the part number is the same, please pay attention this key compatible only for models with 433Mhz (TS004, KBRTS004, 37145-55JU0 or 37145-55AJ0), not compatible for TS002

2) Key Blade: Supplied uncut – must be cut by a locksmith.

2) Transponder Chip (for engine start): please check your old key for ID46 chip, transponder can only be programmed by a locksmith or dealer

3) Door Remote Control (lock / unlock doors):

• DIY programming is possible only if you already have at least one working remote key, it will not work if you have only service grey key.
• If you only have a master key without a remote, the new key must be programmed by a locksmith.
• If your vehicle does not support remote door locking / unlocking, programming is not possible.
• Instructions for DIY remote programming (lock / unlock doors) are provided below

The programming process is divided into two parts:

• (a) programming the remote control for locking and unlocking the doors, and
• (b) programming the transponder chip for engine start.

The two separate instruction sets are listed below.

a) REMOTE CONTROL PROGRAMMING INSTRUCTIONS (LOCK/UNLOCK DOORS)

Preparatory Steps for Remote Control Programming:

• Make sure you have at least one working remote car key.
• Up to 3 remotes can be learned by the vehicle

Steps to program the remote control:

• 1. Sit in the vehicle with the driver’s door open and all other doors closed.
• 2. Insert your original key and turn it to the "On" position and back to "Off."
• 3. Close and open the driver's door three times. Insert and remove the key.
• 4. Wait for the locks to automatically cycle. Press and hold the "Unlock" button on your remote.
• 5. Hold the button until the locks cycle again. This completes the programming procedure

b) TRANSPONDER CHIP PROGRAMMING INSTRUCTIONS (FOR ENGINE START): must be programmed by a locksmith or dealer

Why Do You Need a Spare Car Key?

• Peace of Mind – Never get locked out if you lose or damage your only key
• Save Money – A spare costs far less than emergency locksmith services
• Convenience – Perfect for families sharing one car
• Prevent Wear – Switching keys reduces wear on both key and ignition
• Be Prepared – Always have a backup for unexpected situations