Skip to main content

FIND AUTO PARTS

The storage drawer attaches under the cart’s primary or supplemental drawer to provide extra storage space. Single version provides one large drawer compartment.

This drawer is manually operated (key-lock only). A separately ordered Drawer Travel-Stop accessory is recommended if cart is configured with two or three tall drawer rows.

  • Drawer compartment is easily removed for stocking and cleaning
  • Configure the interior of each drawer to suit your needs using the provided dividers
  • Description: WorkFit-S Sit-Stand Workstation for Single LCD Monitor, LD, with Worksurface and Large Keyboard Tray
  • Includes height-adjustment column, desk clamp, LCD pivot, worksurface, large keyboard tray
  • NOTE: Extra-long cables may be required to span between standing and sitting heights
  • Can be configured to hold a laptop instead of an LCD display: also order the LX Notebook Tray (50-193-200)
  • * Weight Capacity: Maximum total load on height-adjustment assembly = 8.2 kg. LCD weight = 2.3–7.3 kg, worksurface ≤ 2.3 kg, keyboard tray 2.3 kg. For proper operation the total weight of components when added together should not exceed 8.2 kg
  • † Lift Range: LCD and keyboard adjust 46 cm in tandem; LCD adjusts 12.2 cm independently; maximum LCD height adjustment = 58 cm. The worksurface restricts the vertical travel range of the LCD lift pivot; height adjustment of LCD without worksurface is 5" (13 cm)
  • Desk Clamp attaches to surface edge .1.2 to 6 cm thick
  • NOTE: Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment
  • Ergonomic back-tilt keyboard tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
  • Keyboard tray can be installed in nine potential locations relative to the monitor: centered or off-set to left or right; at standard focal distance or 5.6 cm or 11.2 cm farther away
  • Worksurface Dimensions: 6 x 585 x 380 mm
  • Keyboard Tray Dimensions: 6 x 685 x 226 mm
  • Durable, easy-to-clean exterior composed of aluminium, high-grade plastic and powder coated painted steel
  • Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
  • This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds)
  • Shipping Dimensions: 20 x 58 x 115 cm
  • Shipping Weight: 20 kg

Be The First To Review This Product!

Help other Aurus Australia Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review